TFT彩屏
TFT触摸屏
HDMI TFT显示器
工业级TFT屏
条型TFT屏
圆形TFT屏
方形TFT屏
全视角TFT屏
电阻触摸TFT屏
电子墨水屏
高亮液晶屏
树莓派触摸屏
OLED模块
| Product: | 0.49 Inch OLED Display Module | Number Of Pixels: | 64x32 Graphics |
| Driver IC: | SSD1315 Or Equivalent | Display Mode: | Passive Matrix |
| Display Color: | Monochrome (white) | Drive Duty: | 1/32 Duty |
| Panel Size: | 14.5 X 11.6 X 1.227 (mm) | Active Area: | 11.18 X 5.58 (mm) |
| Pixel Pitch: | 0.175 X 0.175 (mm) | Pixel Size: | 0.155 X 0.155 (mm) |
| Viewing Direction: | All Viewing Angles | Interface: | I2C |
| Connection: | Soldering/Hotbar | Pin Number: | 14 Pins (Can Be Customized） |
| Life Time: | 50,000 Hours @60cd/m2 | Compliance: | REACH & RoHS Compliant |
| Highlight: | 0.49 Inch OLED Display, Handheld Application OLED Display, I2C Interface OLED Display | ||
0.49寸OLED显示屏64*32点产品介绍
0.49英寸OLED产品是小型显示屏幕，因其超薄、低功耗、高对比度、广视角等特点，广泛应用于各种智能设备和仪器仪表中。 0.49英寸OLED显示屏通常具有64x32像素点阵，能够显示白色字体，由SSD1315控制器驱动，支持I2C串行接口，工作电压为2.8V。这类显示屏由于OLED的自发光特性，不需要背光，因而具有超薄机身设计和低功耗的优点。其工作温度范围宽，从-40℃到85℃，适用于各种环境条件。此外，0.49英寸OLED显示屏采用FPC连接方式，方便直接焊接到PCB上，无需连接器。
0.49英寸OLED产品由于尺寸紧凑、分辨率高，非常适合对空间要求严格的设备。广泛应用于智能手表、健康监测设备、工业控制系统小型显示屏、便携式游戏机以及其他需要小型高效显示屏的场合。 0.49英寸OLED产品凭借独特的技术优势和广泛的应用潜力，成为现代小型显示的首选解决方案之一。随着技术的成熟和市场的扩大，我们可以预期此类产品将在未来的智能电子设备中发挥更重要的作用。
特征
型号：SFOS049XZ-7111AN
显示方式：无源矩阵
显示颜色：单色（白色）
驱动负载：1/32 负载
驱动IC： SSD1315或同等产品
像素数：64×32
引脚数：14
面板尺寸：14.5×11.6×1.227（毫米）
有效面积：11.18×5.58（毫米）
像素间距：0.175×0.175（毫米）
像素尺寸：0.155×0.155（毫米）
产品图
接口引脚定义
| Pin No. | Symbol | I/O | Function |
| PowerSupply | |||
| 8 | VDD | P | Power Supply for Logic This is a voltage supply pin. It must be connected to external source. |
| 7 | VSS | P | Ground of Logic Circuit This is a ground pin. It acts as a reference for the logic pins. It must be connected to external ground. |
| 14 | VCC | P | Power Supply for OEL Panel This is the most positive voltage supply pin of the chip. A stabilization capacitor should be connected between this pin and VSS when the converter is used. It must be connected to external source when the converter is not used. |
| Driver | |||
| 12 | IREF | I | Current Reference for Brightness Adjustment This pin is segment current reference pin. A resistor should between this pin and VSS. Set the current at 12.5μA maximum. |
| 13 | VCOMH | O | Voltage Output High Level for COM Signal. This pin is the input pin for the voltage output high level for COM signals. A capacitor should be connected between this pin and VSS. |
| DC/DC Converter | |||
| 5 | VBAT | P | Power Supply for DC/DC Converter Circuit This is the power supply pin for the internal buffer of the DC/DC voltage converter. It must be connected to external source when the converter is used. It should be connected to VDD when the converter is not used. |
| 3/4 | C1P/C1N | I | Positive Terminal of the Flying Inverting Capacitor Negative Terminal of the Flying Boost Capacitor The charge-pump capacitors are required between the terminals. They must be floated when the converter is not used. |
| 1/2 | C2P/C2N | ||
| Interface | |||
| 9 | RES# | I | Power Reset for Controller and Driver This pin is reset signal input. When the pin is low, initialization of the chip is executed. Keep this pin pull high during normal operation. |
| 10 | SCL | I | I2C Bus Data Signal The transmission if information in the I2C bus is following a clock sigmal. Each transmission of data bit is taken place during a single clock period of this pin. |
| 11 | SDA | I/O | I2C Bus Data Signal This pin acts as a communication channel between the transmitter and the receiver. |
| Reserve | |||
| 6 | VBREF | - | NC |
光学特性
| Characteristics | Symbol | Conditions | Min | Typ | Max | Unit |
| Brightness(VCC Supplied Externally) | Lbr | Note 5 | 160 | - | - | cd/m2 |
| Brightness(VCC Generatedby Internal DC/DC) | Lbr | Note 6 | 160 | 180 | - | cd/m2 |
| C.I.E. (White) | (x) (y) | C.I.E. 1931 | 0.25 0.27 | 0.29 0.31 | 0.33 0.35 | |
| Dark Room Contrast | CR | - | 2000:01:00 | - | ||
| Viewing Angle | - | Free | - | degree | ||
直流特性
| Characteristics | Symbol | Conditions | Min | Typ | Max | Unit |
| Supply Voltage for Logic | VDD | 1.65 | 2.8 | 3.3 | V | |
| Supply Voltage for Display(Supplied Externally) | VCC | Note 5 (Internal DC/DC Disable) | 7 | 7.25 | 7.5 | V |
| Supply Voltage for DC/DC | VBAT | Internal DC/DC Enable | 3.3 | - | 4.2 | V |
| Supply Voltage for Display (Generatedby Internal DC/DC) | VCC | Note 6 (Internal DC/DC Enable) | 7 | - | 7.25 | V |
| High Level Input | VIH | IOUT = 100μA, 3.3MHz | 0.8×VDD | - | VDD | V |
| Low Level Input | VIL | IOUT = 100μA, 3.3MHz | 0 | - | 0.2×VDD | V |
| High Level Output | VOH | IOUT = 100μA, 3.3MHz | 0.9×VDD | - | VDD | V |
| Low Level Output | VOL | IOUT = 100μA, 3.3MHz | 0 | - | 0.1×VDD | V |
| Operating Current for VDD | IDD | - | 180 | 300 | μA | |
| Operating Current for VCC (VCC Supplied Externally) | ICC | Note 7 | - | 5 | 10 | mA |
| Operating Currentfor VBAT (VCC Generatedby Internal DC/DC) | IBAT | Note 8 | - | 10 | 15 | mA |
| Sleep Mode Current for VDD | IDD, SLEEP | - | 1 | 5 | μA | |
| Sleep Mode Current for VCC | ICC, SLEEP | - | 2 | 10 | μA |
产品图片
可靠性测试内容
| Item | Conditions | Criteria | |
| High Temperature Operation | 70℃, 240 hrs | The operational functions work. | |
| Low Temperature Operation | -40℃, 240 hrs | ||
| High Temperature Storage | 85℃, 240 hrs | ||
| Low Temperature Storage | -40℃, 240 hrs | ||
| High Temperature/Humidity Operation | 60℃, 90% RH, 120 hrs | ||
| Thermal Shock | -40℃ <==> 85℃, 24 cycles | ||
| 60 mins dwell | |||
设施及证书
手机/微信：135 0298 3321 柯先生
手机/微信：138 2960 7086 郑小姐
手机/微信：136 8686 7235 陈小姐
地址： 深圳市宝安区洲石路阳光工业区D栋
在线留言
135 0298 3321
首页 》 
