6.2 英寸1024*600 TFT LCD 显示模块汽车工业级 IPS 屏幕面板

产品中心/ product: OLED屏 TFT彩屏 TFT触摸屏 HDMI TFT显示器工业级TFT屏条型TFT屏圆形TFT屏方形TFT屏全视角TFT屏电阻触摸TFT屏电子墨水屏高亮液晶屏树莓派触摸屏 OLED模块
推荐产品/ hot

产地：深圳 / 中国

品牌：SAEF

型号：SFTO620BH-7180AN

认证：ISO9001 / ISO14000

资料下载视频播放

Product:	6.2 Inch TFT	Resolution:	1024x600 Pixels
Model No.:	SFTO620BH-7180AN	Surface Luminance:	1000 Cd/m2 (nits)
Touch Screen:	Without	Viewing Direction:	IPS, Full Viewing Angle
Pin Number:	50 Pins	Connection:	ZIF
Interface:	RGB 24 Bits	LED Lifetime:	40,000 Hours
Outline Dimension:	143.37(W)×87.13(H)×2.56(T) (mm)	Top::	-30°C To +80°C
Active Area:	137.47(W) X 77.23(H) (mm)	Compliance:	REACH & RoHS Compliant
Highlight:	*6.2 Inch TFT LCD Display, 1024600 TFT LCD Display, Automotive IPS Screen Panel**

6.2寸1024*600 IPS TFT液晶屏 RGB接口产品介绍

1024*600的排列就是常见的16:9显示点阵。由于其高分辨率，1024*600点阵显示器在各种应用场景中都具有独特的优势。

在不同的应用场景中，如工业自动化控制系统、医疗设备、飞机、火车等交通工具的驾驶舱以及一些高端消费电子产品，1024*600点阵显示屏的高分辨率特性可以带来更清晰的显示效果。视觉输出，满足专业领域对图像质量的高要求。同时，随着技术的进步和成本的降低，这种点阵显示技术有望在更多领域得到应用和推广。

这款型号SFTO620BH-7180AN拥有6.2英寸显示屏，1024*600点阵，采用IPS技术，让用户从不同角度都能体验到完美的视觉体验。其工作电压仅为3V-3.6V，典型电压为3.3V，表面亮度为1000nits。用户可以在显示屏上添加RTP或CTP，以增强人机交互效果。

特征

Characteristics	Size	6.2 inch
	Resolution	1024(horizontal)*600(Vertical)
	Interface	24BIT RGB
	Connect type	Connector
	Color Depth	16.7M
	Technology type	a-Si
	Pixel pitch (mm)	0.13425x0.12872
	Pixel Configuration	R.G.B. Vertical Stripe
	Display Mode	Normally Black
	LCD Driver IC	-
	Viewing Direction	IPS, All viewing angles
	Gray Scale Inversion Direction	ALL
Mechanical	LCM (W x H x D) (mm)	143.3787.132.56
	Active Area(mm)	137.472 x 77.232
	With /Without TSP	Without TSP
	Weight (g)	TBD
	LED Numbers	20LED

6.2寸1024*600 IPS TFT液晶屏 RGB接口产品图

20240811143707_29270

接口引脚说明

Pin.No	Symbol	Function
1,2	VLED+	Power for LED backlight (Anode)
3,4	VLED-	Power for LED backlight (Cathode)
5	GND	Power ground
6	NC	Not connect
7	DVDD	Digital Power
8	NC	Not connect
9:	DE	Data Enable signal.
10	VSD	Vertical sync input. Negative polarity
11	HSD	Horizontal sync input. Negative polarity
12-19	B7-R0	Blue Data
20-27	G7-G0	Green Data
28-35	R7-R0	Red Data
36	GND	Ground
37	DCLK	Colock signal
38	GND	Display on/off
39	SHLR	Left or Right Display Control
40	UPDN	Up / Down Display Control
41	NC	Not connect
42	NC	Not connect
43	VPP	OTP Power(+7.8V)
44	RSTB	Global reset pin. Active low to enter reset state.OTP reset Suggest to connecting with an RC reset circuit for stability. Normally pull high. (R=10KΩ , C=1μF)
45	SCL	OTP Serial clock input
46	NC	Not connect
47	NC	Not connect
48	GND	Power ground
49	SDA	OTP Serial data input
50	CS	OTP Chip select pin

绝对最大额定值

背光规格

6.2寸1024*600 IPS TFT液晶屏 RGB接口产品图片

pl183624238-remark

20240811144403_48000

可靠性测试

Test Item	Test Condition	Inspection after test
High Temperature Operation	85℃ for 96 hours	After the Testing is completed, the tested LCD samples must be placed in a normal indoor temperature and humidity environment for 2-4 hours or more before functional and visual inspection. The samples are not allowed to have the following defects: 1. Poor functionality, such as missing display, abnormal display, severe light explosion, etc. 2. There are no polarizing film bubbles, OCA bubbles, or other defects in the appearance. 2. Each tested module can only be used for one of the testing projects
Low Temperature Operation	-30℃ for 96 hours
High Temperature Storage	85℃ for 96 hours
Low Temperature Storage	-30℃ for 96 hours
High Temperature Operation Humidity Operation	60℃, 90%RH for 72 hours
Thermal Shock	-10℃(30min) ~+25℃(5min)~ +60℃(30min) for 10 cycles
Vibration Test (No Operation)	Frequency: 10~55Hz Amplitude:1.0mm Sweep Time: 11min Test Period: 6 Cycles for each direction of X, Y, Z
Static electricity test	Touch ±4KV,air touch ±8KV