TFT彩屏
TFT触摸屏
HDMI TFT显示器
工业级TFT屏
条型TFT屏
圆形TFT屏
方形TFT屏
全视角TFT屏
电阻触摸TFT屏
电子墨水屏
高亮液晶屏
树莓派触摸屏
OLED模块
| Product: | 9 Inch RGB TFT | Resolution: | 800 RGB X 480 |
| Touch Screen: | RTP | Interface: | RGB |
| Surface Luminance: | 400 Cd/m2(nits) | Viewing Direction: | 6H |
| Pin Number: | 50pins | Outline Dim.: | 211.1(W)×126.5(H)×7.3(D) (mm) |
| Active Area: | 201.8 (H) X 114.5(V) (mm) | Surface Treatment: | Hard Coating(3H) |
| Display Colors: | 16.7 M | Connection: | ZIF |
| Operating Temp.: | -20℃ To +70℃ | Storage Temp.: | -30℃ To +80℃ |
| Certificate: | ISO9001:2015 / ISO1400:2015 | Compliance: | REACH & RoHS Compliant |
| Highlight: | 9 Inch Beauty Device Display Screen, 800x480 Beauty Device Display Screen, RTP Beauty Device Display Screen | ||
9 英寸 TFT LCD 800x480 带 RTP 产品介绍
SFTO900SH-7170A4T是一款800×4800高亮度TN TFT液晶显示器。模组尺寸为211.1（宽）×126.5（高）×7.3（深）毫米，有效面积为201.8×114.5毫米，对角线尺寸为9英寸。该TFT模组采用TN技术，典型长宽比为4:3，具有宽视角（70/70/50/70度），具有良好的成本优势，增强客户对其产品的视觉体验。
此外，SFTO900SH-7170A4T还提供高亮度（1000 cd/m2）、高对比度（800:1）和防眩光三大产品特性。这些功能改善了复杂光照环境下的图像显示，增强了客户产品在各种条件下的视觉体验。
TFT模块采用24位RGB接口（连接器Hirose FT12A-50S-0.5H）。 9英寸系列为LVDS、MIPI、 RGB接口可选配置，具体取决于客户MCU的要求。广泛应用于仪器仪表、Bueaty设备、GPS设备、POS终端、收银机、扫描仪、家庭自动化、电话会议、分析仪、家用电器、家庭自动化和安全系统。
特征
| Item | Specification |
| LCD size | 9.0 inch(Diagonal) |
| Driver element | a-Si TFT active matrix |
| Resolution | 800 × 3(RGB) × 480 |
| Display mode | Normally White, Transmissive |
| Dot pitch | 0.0825(W) × 0.2327(H) mm |
| Active area | 198.000(W) × 111.696(H) mm |
| Module size | 211.1(W)×126.5(H)×5.9(D) mm |
| Module size(with RTP) | 211.1(W)×126.5(H)×7.3(D) mm |
| Surface treatment | Anti-Glare |
| Color arrangement | RGB-stripe |
| Interface | RGB |
| View direction(Gray Inversion) | 6 O’Clock |
| Backlight power consumption | 2.046W(Typ.) |
| Panel power consumption | 0.360W(Typ.) |
| Weight | TBD |
9 英寸 TFT LCD 800x480 带 RTP 产品 图纸
绝对最大额定值
| Item | Symbol | Values | Unit | Remark | |
| Min. | Max. | ||||
| Power voltage | DVDD | -0.3 | 5.0 | V | |
| AVDD | -0.5 | 13.5 | V | ||
| VGH | 13.0 | 19.0 | V | ||
| VGL | -12.0 | -2.0 | V | ||
| VGH-VGL | - | 31.0 | V | ||
| Operation Temperature Storage Temperature | TOP | -20 | 70 | ℃ | |
| TST | -30 | 80 | ℃ | ||
| LED Reverse Voltage | VR | - | 1.2 | V | Each LED Note 2 |
| LED Forward Current | IF | - | 25 | mA | Each LED |
电流消耗
（接地=AVSS=0V）
| Item | Symbol | Values | Unit | Remark | ||
| Min. | Typ. | Max. | ||||
| Current for Driver | IGH | - | 0.3 | 1 | mA | VGH =17.0V |
| IGL | - | 0.3 | 1 | mA | VGL = -5.0V | |
| IDVDD | - | 5.5 | 10 | mA | VCC =3.3V | |
| IAVDD | - | 32 | 50 | mA | AVDD =10.4V | |
背光驱动条件
| Item | Symbol | Values | Unit | ||
| Min. | Typ. | Max. | |||
| Voltage for LED backlight | VL | 8.4 | 9.3 | 10.2 | V |
| Current for LED backlight | IL | 198 | 220 | 242 | mA |
| LED life time | - | 40,000 | - | - | Hr |
引脚定义
| No. | Symbol | I / O | Function |
| 1 | VLED | - | Power for LED backlight |
| 2 | VLED | - | Power for LED backlight |
| 3 | GLED | - | Ground for LED backlight |
| 4 | GLED | - | Ground for LED backlight |
| 5 | GND | P | Power ground |
| 6 | VCOM | I | Common voltage |
| 7 | DVDD | P | Power for Digital Circuit |
| 8 | MODE | I | DE/SYNC mode select |
| 9 | DE | I | Data Input Enable |
| 10 | VS | I | Vertical Sync Input |
| 11 | HS | I | Horizontal Sync Input |
| 12 - 19 | B7 - B0 | I | Blue data(MSB) |
| 20 - 27 | G7 - G0 | I | Green data(MSB) |
| 28 - 35 | R7 | I | Red data(MSB) |
| 36 | GND | P | Power Ground |
| 37 | DCLK | I | Sample clock |
| 38 | GND | P | Power Ground |
| 39 | L/R | I | Left / right selection |
| 40 | U/D | I | Up/down selection |
| 41 | VGH | P | Gate ON Voltage |
| 42 | VGL | P | Gate OFF Voltage |
| 43 | AVDD | P | Power for Analog Circuit |
| 44 | RESET | I | Global reset pin. |
| 45 | NC | - | No connection |
| 46 | VCOM | I | Common Voltage |
| 47 | DITHB | I | Dithering function |
| 48 | GND | P | Power Ground |
| 49 | NC | - | No connection |
| 50 | NC | - | No connection |
9 英寸 TFT LCD 800x480 带 RTP 产品图片
可靠性测试
| Test Item | Test Condition | Inspection after test |
| High Temperature Operation | 85℃ for 96 hours | After the Testing is completed, the tested LCD samples must be placed in a normal indoor temperature and humidity environment for 2-4 hours or more before functional and visual inspection. The samples are not allowed to have the following defects: 1. Poor functionality, such as missing display, abnormal display, severe light explosion, etc. 2. There are no polarizing film bubbles, OCA bubbles, or other defects in the appearance. 2. Each tested module can only be used for one of the testing projects |
| Low Temperature Operation | -30℃ for 96 hours | |
| High Temperature Storage | 85℃ for 96 hours | |
| Low Temperature Storage | -30℃ for 96 hours | |
| High Temperature Operation Humidity Operation | 60℃, 90%RH for 72 hours | |
| Thermal Shock | -10℃(30min) ~+25℃(5min)~ +60℃(30min) for 10 cycles | |
| Vibration Test (No Operation) | Frequency: 10~55Hz Amplitude:1.0mm Sweep Time: 11min Test Period: 6 Cycles for each direction of X, Y, Z | |
| Static electricity test | Touch ±4KV,air touch ±8KV |
工厂设施及证书
手机/微信：135 0298 3321 柯先生
手机/微信：138 2960 7086 郑小姐
手机/微信：136 8686 7235 陈小姐
地址： 深圳市宝安区洲石路阳光工业区D栋
在线留言
135 0298 3321
首页 》 
