TFT彩屏
TFT触摸屏
HDMI TFT显示器
工业级TFT屏
条型TFT屏
圆形TFT屏
方形TFT屏
全视角TFT屏
电阻触摸TFT屏
电子墨水屏
高亮液晶屏
树莓派触摸屏
OLED模块
| Keywords: | 13.3 Inch PCAP TFT Module | Resolution: | 1920*1080 Pixels |
| LCD Interface: | EDP | Surface Luminance: | 1000 Cd/m2 |
| Touch Screen: | CTP (Projective Capacitive Touch Screen) | CTP Interface: | USB |
| Active Area: | 293.76 X 165.24 (mm) | Operating Temp.: | -10℃ To +60℃ |
| Storage Temp.: | -20℃ To +60℃ | Display Type: | IPS Full Viewing Angles |
| Surface Treatment: | Haze 25%, 3H | Contrast Ratio: | 1000 |
| Display Color: | 16.7 M | LED Lifetime: | 30,000 Hours |
| Certificate: | ISO9001:2015 / ISO1400:2015 | Compliance: | REACH & RoHS Compliant |
| Highlight: | 13.3-Inch TFT LCD Module, HD TFT LCD Module, 1920x1080 TFT LCD Module | ||
13.3 英寸 eDP TFT 带 OCA PCAP 产品说明
SFTO1330XC-7119A10CT是一款13.3英寸高分辨率TFT LCD显示模块，分辨率为1920x1080像素，具有PCAP触摸功能。该款高分辨率TFT LCD显示模块内置TC2055G驱动IC，支持eDP接口。其外形尺寸为 307.55 x 185.62 x 4.58 毫米（带触摸），有效区域尺寸为 293.76 x 165.24 毫米，采用 IPS 技术，可在各个方向提供 80 度的更宽视角（左：80 / 右：80 /上：80/下：80）。
该机型具有1000:1（典型值）的高对比度和1000nits（典型值）的亮度，保证视觉效果生动清晰，提升用户体验。此外，该模块采用带有ILI2511 IC的投射电容式触摸屏（PCAP），支持USB和I2C接口以及10点触摸，进一步提升了其可用性和功能性。
该模块工作电压范围为 3.0V 至 3.6V（典型值：3.3V），可承受各种环境条件。其工作温度范围为-10°C至+60°C，存储温度范围为-20°C至+60°C，适用于广泛的应用。从工业机械和设备到 HMI（人机界面）系统、POS（销售点）终端和户外自动售货系统，这款高分辨率 TFT LCD 显示模块可提供卓越的性能和可靠性。
特征
| Characteristics | Size | 13.3 inch |
| Resolution | 1920(horizontal)x1080(Vertical) | |
| Interface | eDP1.2/2.7Gbps/2lane | |
| Connect type | 20455-030E-76 (I-PEX) | |
| Color Depth | 16.7M | |
| Technology type | A-si | |
| Display Spec. Pixel pitch (mm) | 0.153 x 0.153 | |
| Pixel Configuration | R.G.B. Vertical Stripe | |
| Display Mode | Normally Black | |
| TP Driver IC | ILI2511 | |
| LCD Surface Treatment | Anti-glare coating:(3H) | |
| Viewing Direction | U/D/L/R:85/85/85/85 | |
| Contrast Ratio | 250(TYP.) | |
| Color gamut | 72% | |
| Luminance(cd/m2) | 1000(TYP.) | |
| Consumption of Power | LCD:1.8(W)(Max.)(White Pattern) BL:see details below | |
| LED Numbers | 50 LEDS | |
| Weight (g) | - | |
| Mechanical | Outline (W x H x D) (mm) | 307.55 x 185.62 x 7.25 mm |
| TP Lens view area(mm) | - | |
| LCM (W x H x D) (mm) | 305.19 x 177.69 x 2.58 mm | |
| LCD Active Area(mm) | 293.76 x 165.24 | |
| With /Without TSP | With TSP |
13.3英寸eDP TFT带OCA PCAP产品图
显示管脚定义
| Terminal | Symbol | Functions |
| 1 | NC | No connection |
| 2 | H-GND | Ground |
| 3 | LAN1 N | Complement Signal Link _Lane1 |
| 4 | LAN1 P | True Signal Link _Lane1 |
| 5 | H-GND | Ground |
| 6 | LAN0_N | Complement Signal Link _Lane0 |
| 7 | LAN0_P | True Signal Link _Lane0 |
| 8 | H-GND | |
| 9 | AUXP | True Signal Link _Auxiliry Channel |
| 10 | AUXN | |
| 11 | H-GND | Ground |
| 12 | LCD_VCC | Power Supply, 3.3V (typ.) |
| 13 | LCD_VCC | Power Supply, 3.3V (typ.) |
| 14 | BIST | Panel self test enable |
| 15 | H_GND | Ground |
| 16 | H_GND | Ground |
| 17 | HPD | HPD(Hot Plug Detect) Signal Pin |
| 18 | BL_GND | High Speed Ground |
| 19 | BL_GND | High Speed Ground |
| 20 | BL_GND | High Speed Ground |
| 21 | BL_GND | High Speed Ground |
| 22 | BL EN | Backlight on/off Control pin |
| 23 | BL PWM | Back light PWM Dimming |
| 24 | NC | No connection |
| 25 | NC | No connection |
| 26 | BL PWR | Backlight power |
| 27 | BL PWR | Backlight power |
| 28 | BL PWR | Backlight power |
| 29 | BL PWR | Backlight power |
| 30 | NC | No connection |
电气规格
| Parameter | Min. | Typ. | Max. | Unit | Remarks | |
| Surface Brightness | 800 | 1000 | cd/m2 | |||
| Power Supply Voltage | VDD | 3 | 3.3 | V | Note 1 | |
| Permissible Input Ripple Voltage | VRF | - | - | 100 | mV | At VDD = 3.3V |
| Power Supply Current | IDD | - | - | mA | Note1 | |
| Differential Input Voltage | VID | - | 1320 | mV | ||
| Power Consumption | 0.9 | W | Note1 | |||
| - | 4 | - | W | Note2 | ||
| - | 4.9 | - | W | |||
光学规格
| Items | Symbol | Condition | Specifications | Unit | |||
| Min. | Typ. | Max. | |||||
| Contrast Ratio | CR | 700 | 1000 | ||||
| Luminance of white | YLI | O=0deg | 1000 | cd/m² | |||
| Response Time | TR+TF | 30 | 35 | ms | |||
| Chromaticity | Red | XR | (0.642) | ||||
| YR | (0.333) | ||||||
| Green | Xg | (0.301) | |||||
| Yg | (0.621) | ||||||
| Blue | XB | (0.153) | |||||
| YB | (0.055) | ||||||
| White | Xw | (0.313) | |||||
| Yw | (0.329) | ||||||
| Viewing angle | Hor. | ①1(3 o'clock) | 80 | 85 | |||
| ①2(9 o'clock) | Center CR≥10 | 80 | 85 | deg | |||
| Ver. | θ2(12 o'clock) | 80 | 85 | ||||
| θ1(6 o'clock) | 80 | 85 | |||||
| NTSC ratio | % | 65 | 72 | % | |||
13.3 英寸 eDP TFT，采用 OCA PCAP 产品图片
可靠性测试
| Test Item | Test Condition | Inspection after test |
| High Temperature Operation | 60℃ for 96 hours | After the Testing is completed, the tested LCD samples must be placed in a normal indoor temperature and humidity environment for 2-4 hours or more before functional and visual inspection. The samples are not allowed to have the following defects: 1. Poor functionality, such as missing display, abnormal display, severe light explosion, etc. 2. There are no polarizing film bubbles, OCA bubbles, or other defects in the appearance. 2. Each tested module can only be used for one of the testing projects |
| Low Temperature Operation | 0℃ for 96 hours | |
| High Temperature Storage | 60℃ for 96 hours | |
| Low Temperature Storage | -10℃ for 96 hours | |
| High Temperature Operation Humidity Operation | 60℃, 90%RH for 72 hours | |
| Thermal Shock | -10℃(30min) ~+25℃(5min)~ +60℃(30min) for 10 cycles | |
| Vibration Test (No Operation) | Frequency: 10~55Hz Amplitude:1.0mm Sweep Time: 11min Test Period: 6 Cycles for each direction of X, Y, Z | |
| Static electricity test | Touch ±4KV,air touch ±8KV |
手机/微信：135 0298 3321 柯先生
手机/微信：138 2960 7086 郑小姐
手机/微信：136 8686 7235 陈小姐
地址： 深圳市宝安区洲石路阳光工业区D栋
在线留言
135 0298 3321
首页 》 
