2.42 英寸黄色 OLED 显示屏 128x64 点分辨率 7 接头针 SPI 接口

产品中心/ product: OLED屏 TFT彩屏 TFT触摸屏 HDMI TFT显示器工业级TFT屏条型TFT屏圆形TFT屏方形TFT屏全视角TFT屏电阻触摸TFT屏电子墨水屏高亮液晶屏树莓派触摸屏 OLED模块
推荐产品/ hot

2.42 英寸黄色 OLED 显示屏 128x64 点分辨率 7 接头针 SPI 接口

产地：深圳 / 中国

品牌：SAEF

型号：SFOM242YZ7-12864WBYG-01

认证：ISO9001 / ISO14000

资料下载视频播放

产品详情

Product:	2.42"(2.4") Inch OLED Display	Resolution:	128x64 Dots
Display Mode:	Passive Matrix	Optics:	All Viewing Angles
Outline Dim.:	71.0(L) X 43.5(W) X 6.0(T) (mm)	Active Area:	55.01(L) X 27.5(W) (mm)
Pixel Pitch:	0.43 X 0.43 (mm)	Driving Method:	1/64 Duty Cycle
Operating Temp:	-40°C To +70°C	Pin Number:	7 Header Pins
Interface:	SPI Interface	Compliance:	REACH & RoHS Compliant
Highlight:	7 Header Pin Yellow OLED Display, SPI Interface Yellow OLED Display, 2.42 Inch Yellow OLED Display

SPI OLED图形显示屏2.42英寸产品介绍

产品快速回顾

· 型号 SFOMS242YZ7-12864WBYG-01

· 分辨率：128x64 点

· 接口：SPI

· 接口引脚数：7 接头引脚

· 所有视角

· 关税：1/64

· 颜色：白/蓝/黄/绿，可选

· 触摸屏：无

描述

SAEF Technology SFOMS242YZ7-12864WBYG-01是一款点阵128x64 COB图形型OLED模组。有效区域的尺寸为 2.42 英寸对角线，模块尺寸为 71.0x43.5 毫米。这款2.42英寸OLED模组内置IC SPD0301，拥有20,000:1的高对比度。有多种接口可供选择，包括SPI和IIC（I2C）接口。逻辑电源电压范围为1.65V-3.3V，典型值为2.8V。可用的发光颜色有白色、黄色、蓝色、绿色和红色。

SFOMS242YZ7-12864WBYG-01 OLED模块原本不带触摸，但可定制触摸面板。广泛应用于医疗分析仪、仪表仪器、传感器设备、POS终端、收银机、手持设备、移动点餐机等。

SPI OLED图形显示屏2.42英寸产品图

pl169974674-remark

接口引脚定义

PIN	SYMBOL	Descriptions
1	GND	Ground of Logic Circuit
2	VDD	Power Supply for Logic
3	SCK	Serial clock input.
4	SDA	Serial data input.
5	RST	This pin is reset signal input. When the pin is low, initialization of the chip is executed. Keep this pin pull high during normal operation.
6	DC	This pin is Data/Command control pin. When the pin is pulled high and serial interface mode is selected, the data at SDIN will be interpreted as data. When it is pulled low, the data at SDIN will be transferred to the command register.
7	CS	Chip Select. Chip is selected when CS0 = “L” .

绝对最大额定值

Parameter	Symbol	Min	Max	Unit	Notes
Supply Voltage for Logic	VDD	-0.3	4	V	1, 2
Supply Voltage for Display	VCC	8	17	V	1, 2
Operating Temperature	TOP	-40	70	.C
Storage Temperature	TSTG	-40	85	.C	3
Life Time (220 cd/m2)		13,000	-	hour	4(1)
Life Time (200 cd/m2)		15,000	-	hour	4(2)
Life Time (180 cd/m2)		16,000	-	hour	4(3)

直流特性

Characteristics	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage for Logic	VDD		1.65	2.8	3.3	V
Supply Voltage for Display	VCC		11.5	12	12.5	V
High Level Input	VIH		0.8×VDD	-	-	V
Low Level Input	VIL		-	-	0.2×VDD	V
High Level Output	VOH	IOUT = 100μA, 3.3MHz	0.9×VDD	-	-	V
Low Level Output	VOL	IOUT = 100μA, 3.3MHz	-	-	0.1×VDD	V
VDD Supply Current VDD =2.8V, VCC = 12, IREF = 10uA , No Panel attached, Display ON, All ON,	IDD	Contrast = FFh	-	90	110	μA
VCC Supply Current VDD = 2.8V, VCC =12, IREF =10uA, No Panel attached, Display ON, All ON	ICC	Contrast = FFh	-	450	580	μA
Segment Output Current, VDD = 2.8V, VCC =12V, IREF=10uA, Display ON.	ISEG	Contrast=FFh	280	310	340	μA
		Contrast=AFh	-	215	-
		Contrast=7Fh	-	155	-
		Contrast=3Fh	-	78	-
		Contrast=0Fh	20		-
Sleep Mode Current for VDD	IDD, SLEEP	VDD = 1.65V~3.3V, VCC = 7V~16V Display OFF, No panel attached	-	-	10	μA
Sleep Mode Current for VCC	ICC, SLEEP	VDD = 1.65V~3.3V, VCC = 7V~16V Display OFF, No panel attached	-	-	10	μA

电气规格

Characteristics	Symbol	Conditions	Min	Typ	Max	Unit
Normal mode current consumption		All pixels on	-	17	25	mA
Standby mode current consumption		Standby mode 10% pixels on	-	0.5	1.5	mA
Normal mode power consumption		All pixels on	-	71.5	97.5	mW
Standby mode power consumption		Standby mode 10% pixels on	-	6.5	19.5	mW
Brightness	Lbr	-	90	110	-	cd/m2
C.I.E. (White)	(x) (y)	C.I.E. 1931	0.24 0.28	0.28 0.32	0.32 0.36
Dark Room Contrast	CR	-	2000:1	-	-
Viewing Angle		-	160	-	-	degree

串行接口时序特性（4 线 SPI）

Symbol	Description	Min	Max	Unit
tcycle	Clock Cycle Time	250	-	ns
tAS	Address Setup Time	150	-	ns
tAH	Address Hold Time	150	-	ns
tCSS	Chip Select Setup Time	120	-	ns
tCSH	Chip Select Hold Time	60	-	ns
tDSW	Write Data Setup Time	50	-	ns
tDHW	Write Data Hold Time	15	-	ns
tCLKL	Clock Low Time	100	-	ns
tCLKH	Clock High Time	100	-	ns
tR	Rise Time	-	15	ns
tF	Fall Time	-	15	ns

可靠性测试条件

Item	Conditions	Criteria
High Temperature Operation	70.C, 240 hrs	The operational functions work.
Low Temperature Operation	-40.C,120 hrs
High Temperature Storage	85.C, 120 hrs
Low Temperature Storage	-40.C, 120 hrs
High Temperature/Humidity Operation	65.C, 90% RH, 120 hrs
Thermal Shock	-40°C ~85°C (-40°C /30min; transit /3min; 85°C /30min; transit/3min) 1cycle: 66min, 100 cycles