OLED 显示屏工厂中国 0.96 英寸 128x64 点 OLED 图形模块单色 SPI 接口

产品中心/ product: OLED屏 TFT彩屏 TFT触摸屏 HDMI TFT显示器工业级TFT屏条型TFT屏圆形TFT屏方形TFT屏全视角TFT屏电阻触摸TFT屏电子墨水屏高亮液晶屏树莓派触摸屏 OLED模块
推荐产品/ hot

OLED 显示屏工厂中国 0.96 英寸 128x64 点 OLED 图形模块单色 SPI 接口

产地：深圳 / 中国

品牌：SAEF

型号：SF-OS096HX-12864W-01

认证：ISO9001 / ISO14000

资料下载视频播放

产品详情

Product:	0.96 Inch OLED Display Module	Resolution:	128x64 Graphics
Driver IC:	SSD1306BZ Or Equivalent	Outline Dim.:	26.7x19.26x1.41 (mm)
Display Color:	White&Blue Optional	Touch Screen:	Without Touch Screen (Optional)
Viewing Direction:	All Viewing Angles	Interface:	6800, 8080, SPI, I2C
Connection:	Soldering/Hotbar (customizable）	Pin Number:	30 Pins (Can Be Customized）
Life Time:	50,000 Hours @60cd/m2	Compliance:	REACH & RoHS Compliant
Highlight:	SPI Interface OLED Display Module, 0.96 Inch OLED Display Module, 128x64 OLED Display Module

0.96寸OLED显示屏SPI接口产品介绍

产品快速回顾

· 型号 SF-OS096HX-12864W-01

· 0.96英寸

· 点分辨率 128x64

· 接口：6800、8080、SPI、I2C

· 驱动芯片：SSD1306BZ

· 引脚数：30

· 触摸屏：无

描述

SF-OS096HX-12864W-01是一款128x64分辨率COG图形OLED显示模块，对角线尺寸0.96英寸。该型号设计为消费级，具有价格竞争优势。模块内置SSD1306 IC；它支持6800、8080、I2C和4线SPI串行接口。逻辑电源电压为3V，显示电源电压为7.5V，显示50%检查板电流为6mA @ 7.5Vcc（典型值），驱动占空比1/64。

SF-OS096HX-12864W-01 这款0.96英寸COG图形OLED模组适用于可穿戴设备、智能家居应用等。该模组可在-40℃至+70℃的温度下工作；其储存温度范围为-40℃至+85℃。

产品优势

SAEF科技是一家专业的OLED模组供应商。我们提供各种标准无源矩阵 OLED (PMOLED) / OLED 点阵显示器和定制设计字符 OLED 模块、图形 OLED 显示器和 OLED 显示面板。机械结构包括板上芯片（COB）、玻璃上芯片（COG）和TAB（卷带自动接合）类型。客户可以轻松地将应用从 STN LCD 升级到 OLED 显示器。 SAEF OLED 模块具有以下所有重要优点：

· 更快的响应时间“+25 ℃ 10 µsec”。

· 无限视角“高达 175 度”

· 薄型——无需背光，自发光

· 高亮度

· 高对比度“高达 10,000:1”

· 宽工作温度“-40℃~80℃”

· 更低的功耗

0.96英寸薄型OLED显示屏产品图

pl81661270-remark

pl81661268-remark

接口引脚定义

PIN NO.	SYMBOL	TYPE	FUNCTION DESCRIPTIONS
1	NC(GND)	P	It should be connected to external ground.
2	C2P	I	C1P/C1N-Pin for charge pump capacitor. C2P/C2N-Pin for charge pump capacitor. Connect to each other with a capacitor. They must be floated when the Charge pump not use.
3	C2N		as above
4	C1P		as above
5	C1N		as above
6	VBAT	P	Power supply for charge pump regulator circuit. It must be connected to external source when charge pump is used. It must be float when charge pump is not used.
7	NC		NC
8	VSS	P	Ground pin. It must be connected to external ground.
9	VDD	P	Power pin for logic circuit. It must be connected to external source.
10	BS0		Interface Select Pins
11	BS1		Interface Select Pins
12	BS		Interface Select Pins
13	CS#	I	Chip Select input pin. Active “L”
14	RES#	I	Hardware reset input pin. Active “L” .
15	D/C#	I	This is Data/Command control pin. When the pin is pulled HIGH, the data at D[7:0] is data. When the pin is pulled LOW, the data at D[7:0] is command. In I2C mode, this pin acts as SA0 for slave address section. When 3-wire serial interface is selected, this pin must be connected to VSS
16	R/W#	I	read/write select pin. is selected, this pin must be connected to
17	E#	I	read/write enable pin. is selected, this pin must be connected to
18	D0	I/O	These are 8-bit bi-directional data bus to be connected to microprocessor’s Data bus. When serial interface mode is selected, D2 should be kept NC, D1 will be the serial data input: SDIN, D0 will be the serial clock input: SCLK. When I2C mode is selected, D2, D1 should be tied together and serve as SDA and D0 is the serial clock input, SCL.
19~25	D1~D7		These are 8-bit bi-directional data bus to be connected to microprocessor’s Data bus. When serial interface mode is selected, D2 should be kept NC, D1 will be the serial data input: SDIN, D0 will be the serial clock input: SCLK. When I2C mode is selected, D2, D1 should be tied together and serve as SDA and D0 is the serial clock input, SCL.
26	IREF	I	Current reference for brightness adjustment. This is segment output current reference pin. A resistor should be connected between this pin and VSS .Set the current at 12.5 uA maximum.
27	VCOMH	O	COM signal deselected voltage level. A capacitor should be connected between this pin and VSS.
28	VCC	P	Power supply for OLED driving voltage. A capacitor should be connected between this pin and VSS, when charge pump is used. It must be connected to external source when charge pump is not used.
29	VLSS	P	This is an analog ground pin. It should be connected to VSS externally.
30	NC(GND)	P	It should be connected to external ground.

绝对最大额定值

Characteristic	Symbol	Standard Value			Unit	Notes
Characteristic	Symbol	MIN	TYP	MAX	Unit	Notes
Power Supply Voltage(1)	VDD	-0.3	-	+4.0	V	1,2
Power Supply Voltage(2)	VBAT	-0.3	-	4.5	V	1,2
Power Supply Voltage(3)	VCC	0	-	15.0	V	1,2
Operating Temperature	TOPR	-40	-	+70	0C
Storage Temperature	TSTG	-40	-	+85	0C	3
LifeTime (120 cd/m2)		10000	-	-	hour	4
LifeTime (80 cd/m2)		30000	-	-	hour	4
LifeTime (60 cd/m2)		50000	-	-	hour	4

注1：以上电压均基于“VSS=0V”。

注2：当该模块的使用超出上述绝对最大额定值时，模块可能会发生永久性损坏。此外，对于正常操作，最好在第 9-1 节“直流电气特性”的条件下使用该模块。如果在超出这些条件的情况下使用该模块，可能会发生模块故障，并且模块的可靠性可能会下降。

注3：规定的温度范围不包括偏光片。偏光片的最高承受温度应为80℃。

注 4：VCC = 9.0V，Ta = 25°C，50% 棋盘式。

寿命终止指定为达到初始亮度的 50%。室温下的平均工作寿命是通过高温条件下的加速工作来估算的。

直流电气特性

Symbol	Parameter	Test condition	Standard Value			Unit
Symbol	Parameter	Test condition	MIN	TYP	MAX	Unit
VDD	Logic Supply Voltage	-	1.65	2.8	3.3	V
VBAT	Charge Pump Regulator Supply Voltage	Internal Charge Pump Enable	3.5	-	4.2	V
VCC	Operating Voltage for OLED (Generated by charge pump)	Internal Charge Pump Enable	7.0	7.5		V
VCC	Operating Voltage for OLED (Supplied Externally)	Internal Charge Pump Disable	8.5	9.0	9.5	V
VIH	High Logic Input Level		0.8*VDD	-	-	V
VIL	Low Logic Input Level		-	-	0.2*VDD	V
VOH	High Logic Output Level	IOUT = 100µA, 3.3MHz	0.9*VDD	-	-	V
VOL	Low Logic Output Level	IOUT = 100µA, 3.3MHz	-	-	0.1*VDD	V
IDD, SLEEP	IDD, Sleep Mode Current		-	-	10	uA
IBAT, SLEEP	IBAT, Sleep Mode Current		-	-	10	uA
ICC, SLEEP	ICC, Sleep Mode Current		-	-	10	uA
IDD	VDD Supply Current		-	50	150	uA
ICC	VCC Supply Current (VCC Supplied Externally)	VDD = 2.8V, VCC = 9V, 100% Display Area Turn on	-	9.0	15.0	mA
IBAT	IBAT Supply Current (VCC Generated by charge pump)	VDD = 2.8V, VCC = 7.25V, 100% Display Area Turn on	-	25.6	32.0	mA

光学特性

Symbol	Parameter	condition	Standard Value			Unit
Symbol	Parameter	condition	MIN	TYP	MAX	Unit
Lbr	Brightness (VCC Supplied Externally)		120	-	-	cd/m2
Lbr	Brightness (VCC Generated by charge pump)		80	120	-	cd/m2
(x)	C.I.E. (White)	C.I.E. 1931	0.25	0.29	0.33
(y)	C.I.E. (White)	C.I.E. 1931	0.27	0.31	0.35
CR	Dark Room Contrast		-	2000:1	-
	Viewing Angle		-	160	-	degree