2.8 英寸 TFT LCD 显示屏制造商中国 240x320 点 TN SPI 串行接口

产品中心/ product: OLED屏 TFT彩屏 TFT触摸屏 HDMI TFT显示器工业级TFT屏条型TFT屏圆形TFT屏方形TFT屏全视角TFT屏电阻触摸TFT屏电子墨水屏高亮液晶屏树莓派触摸屏 OLED模块
推荐产品/ hot

2.8 英寸 TFT LCD 显示屏制造商中国 240x320 点 TN SPI 串行接口

产地：深圳 / 中国

品牌：SAEF

型号：SF-TC280P-8722B-N

认证：ISO9001 / ISO14000

资料下载视频播放

产品详情

Product:	2.8 Inch TFT Display	Resolution:	240*320
Viewing Direction:	12:00	Interface:	SPI
Driver IC:	ILI9341V	Touch Screen:	Without Touch Panel
Cover Glass Dimension:	Customizable	Pin Number:	13 Pins
Connection:	FPC	Surface Luminance:	500 Cd/m2
LED Lifetime:	40,000 Hours	Compliance:	REACH & RoHS Compliant
Highlight:	2.8 Inch TFT LCD Display, SPI Serial Interface TFT LCD Display, 240x320 Dots TFT LCD Display

2.8英寸TFT液晶显示屏240x320点阵TN SPI接口产品介绍

产品快速回顾

· 型号 SF-TC280P-8722B-N

· 分辨率：240x320 点

· 视角方向 : 12H

· 控制器IC：ILI9341V

· 亮度（cd/m²）：500

· 触摸屏：无（可选RTP&CTP）

描述

SF-TC280P-8722B-N 是一款 2.8 英寸纵向模式 SPI TFT-LCD 模块，分辨率为 240x320 像素。 SF-TC280P-8722B-N液晶模块内置ILI9341V IC；支持SPI接口；其工作电压（Vdd）范围为2.6V至3.3V，典型值为2.8V。该模块视角方向为12点钟方向，对比度为400:1。

SF-TC280P-8722B-N是纵向模式TFT-LCD，亮度为500尼特（典型值）。 SF-TC280P-8722B-N的工作温度范围为-20°C至+70°C，存储温度范围为-30°C至+80°C。它是防盗门系统、迷你音频播放器、婴儿监视器和其他手持设备的理想选择。

2.8 英寸 TFT LCD 显示屏 240x320 点 TN SPI 接口产品图

pl169735785-remark

引脚说明

NO.	PIN NAME	I/O	Description
1	LEDK	I	LED Cathode
2	LEDA	I	LED Anode
3	GND	I	Power ground
4	CS	I	Input pin for chip selection signal
5	RS	I	In 4-line SPI, this pin is used as D/CX (data/ command selection).
6	SCL	I	In Serial Interface, this is used as SCL.
7	RESET	I	This pin is used to select “Data or Command” in the parallel interface
8	SDO	I/O	Output signal
9	SDA	I	Input signal
10	GND	I	Power ground
11	VDD	I	Power Supply1.8V/2.8V Voltage
12	VDD	I	Power Supply2.8V Voltage
13	GND	I	Power ground

绝对最大额定值

Item	Symbol	Value	Unit
Power supply voltage for logic	VDD	1.6~3.3	V
Input voltage	Vin	VDD+0.3	V
Operating temperature	Topr	-20 to 70	°C
Storage temperature	Tstg	-30 to 80	°C

直流特性 (VDD=2.8V,Ta=25°C)

Item	Symbol	Min	Type	Max	Unit	Test condition
Operating voltage	VDD	2.6	2.8	3.3	V	-
Supply current	IDD	-	12	15	mA	VDD=2.8V,Ta=25°C
Input voltage	VIH	0.8VDD	-	VDD	V	-
Input voltage	VIL	0	-	0.2VDD	V	-
Input leakage current	IIL	-1.0	-	1.0	mA	VIN=VDD or VSS

背光电光特性

Item	Symbol	MIN	TYP	MAX	UNIT	Test Condition	Note
Supply Voltage	Vf	3.0	3.2	3.4	V	If=80MA	-
Supply Current	If	-	80	80	mA	-	-
Reverse Voltage	Vr	-	-	5	V	-
Power dissipation	Pd	-	256	-	mW	-
Luminous Intensity for LCM	-	-	500	-	Cd/m2	If=80MA	Without CTP
Uniformity for LCM	-	80	-	-	％	If=80MA	-
Backlight Color	White

光学特性

No.	ITEM		Symbol	Conditions	Specification			Unit	Note
					Min	Typ	Max
1	Response Time		Tr+Tf	25℃	-	25	-	Ms	(1)(2)
2	Contrast Rate		Cr	θ=0,Normal viewing angle	300	400	-	-	(1)(3)
3	Viewing Angle	Hor.	θR	CR>10		60	-	Deg	-
			θL			60	-
		Ver.	Θ+		-	60	-
			Θ-		-	45	-