2.13 英寸三色电子纸电子墨水屏，2.13 英寸 EPD 彩色电子墨水电子纸显示屏

产品中心/ product: OLED屏 TFT彩屏 TFT触摸屏 HDMI TFT显示器工业级TFT屏条型TFT屏圆形TFT屏方形TFT屏全视角TFT屏电阻触摸TFT屏电子墨水屏高亮液晶屏树莓派触摸屏 OLED模块
推荐产品/ hot

2.13 英寸三色电子纸电子墨水屏，2.13 英寸 EPD 彩色电子墨水电子纸显示屏

产地：深圳 / 中国

型号：SFEPD213BWY-7018A01

认证：ISO9001 / ISO14000

资料下载视频播放

产品详情

产品概述

使用 SFEPD213BWY-7018A01 升级您的显示器，这是一款多功能的 2.13 英寸电子纸显示器，具有三种颜色（白色、黑色和红色）。这款高分辨率 (131dpi) 屏幕具有以下特点：

· 节能：超低功耗。显示器仅在图像变化时才耗电，无需任何电源来维持。

· 卓越的可读性：超宽视角（接近 180°）确保从任何方向都能清晰显示。

· 时尚设计：超薄超轻，非常适合集成到各种设备中。

· 轻松连接：SPI 接口可实现无缝兼容。

· 环保意识：符合 RoHS 标准。

主要应用：

· 电子货架标签：创建动态、醒目的价格和产品信息显示。

· 电子阅读器：享受纸质阅读体验。

· 电子笔记本：以自然的感觉记录笔记和草图。

· 可穿戴设备：将信息显示集成到紧凑型设备中。

· 还有更多！

产品规格

Product:	EPD 2.13″ inch
Resolution:	122×250 Dots Resolution
Display Mode:	Active Matrix Electrophoretic Display(AM EPD)
Optics:	All Viewing Angles
Outline Dim.:	29.2(H)x59.2(V)x1.0(D) Mm
Active Area:	23.705(H)x48.55(V) Mm
Operating Temp:	0°C To +50°C
Storage Temp:	-25°C To +60°C
Pin Number:	24 Pins
Interface:	SPI

外形结构图

接口引脚定义

No.	Signal	Type	Connected to	Function
1	NC	–	–	Not connected
2	GDR	O	Power MOSFET Driver control	This pin is the N-Channel MOSFET Gate Drive Control.
3	RESE	I	Booster Control Input	This pin is the Current Sense Input for the Control Loop.
4	NC	–	–	Not connected
5	VSHR	C	Capacitor	This pin is the Positive Gate driving voltage and the Power Supply pin for VSH2. A stabilizing capacitor should be connected between VSH2 and GND.
6	TSCL(NC)	–	–	–
7	TSDA(NC)	–	–	–
8	BS	I	VSS	This pin is setting panel interface.
9	BUSY	O	Device Busy Signal	This pin is Busy state output pin. When Busy is High, the operation of the chip should not be interrupted, and Command should not be sent.
10	RES_N	I	System Reset	This pin is reset signal input.Active Low.
11	D/C	I	VDDIO or VSS	This pin is Data/Command control
12	CSB	I	VDDIO or VSS	This pin is the chip select.
13	SCL	I	Data Bus	Serial communication clock input.
14	SDA	I	Data Bus	Serial communication data input/output.
15	VDDIO	P	Power Supply	Power for interface logic pins& I/O. It should be connected with VCI.
16	VCI	P	Power Supply	Power Supply for the chip.
17	GND	P	Ground	Ground
18	VDDD	C	Capacitor	Internal regulator output. A capacitor should be connected between VDD and GND.
19	VPP(NC)	–	–	–
20	VSH	C	Capacitor	This pin is the Positive Source driving voltage. A stabilizing capacitor should be connected between VSH and GND.
21	VGH	C	Capacitor	A stabilizing capacitor should be connected between VGH and GND.
22	VSL	C	Capacitor	This pin is the Negative Source driving voltage and the Power Supply pin for VCOM. A stabilizing capacitor should be connected between VSL and GND.
23	VGL	C	Capacitor	A stabilizing capacitor should be connected between VGL and GND.
24	VCOM	C	Capacitor	This pin is the VCOM driving voltage. A stabilizing capacitor should be connected between VCOM and GND.