产品概述
SFEPD213BWR-7018A01 是一款 2.13 英寸电子纸显示器 (EPD),可为您的应用提供清晰的视觉效果和显著的优势:
· 鲜艳的三色显示屏:用白色、黑色和红色清晰地展示信息。
· 高分辨率:得益于 131 dpi 的分辨率,可以轻松呈现精细的细节。
· 节能:享受超低功耗和无需电源即可持续显示的图像。
· 宽视角:近 180° 视角,可实现最大可见度。
· 轻薄:非常适合时尚、节省空间的设计。
· 易于集成:SPI 接口,可顺利实施。
· 环保:符合 RoHS 标准。
非常适合电子货架标签
由于其清晰度、效率和适应性设计,该显示器是电子货架标签系统(和其他类似应用)的绝佳选择。
主要规格
Screen Size | 2.13 inch |
Display Mode | Active Matrix EPD |
Display Resolution | 122(H)×250(V) Pixels |
Active Area | 23.705(H)x48.55(V) mm |
Pixel Pitch | 0.194.3 x 0.194.2(131dpi) |
FPL (Front Plane Laminate) | Spectra Red 2.0 |
Outline Dim.: | 29.2(H)x59.2(V)x1.0(D) mm |
Weight | 4.1 g |
Logic supply voltage | 3.0V typical |
Operation Temperature | 0°C to +50°C |
Storage Temperature | -25°C to +60°C |
Controller: | SPLC780D Or Equivalent |
Interface: | SPI |
Compliance: | REACH & RoHS Compliant |
外形结构图
接口引脚定义
Pin # | Single | Description | Remark |
1 | NC | No connection and do not connect with other NC pins | Keep Open |
2 | GDR | N-Channel MOSFET Gate Drive Control | |
3 | RESE | Current Sense Input for the Control Loop | |
4 | NC | No connection and do not connect with other NC pins | Keep Open |
5 | VSH2 | Positive Source driving voltage | |
6 | TSCL | I²C Interface to digital temperature sensor Clock pin | Note 6-6 |
7 | TSDA | I²C Interface to digital temperature sensor Data pin. | Note 6-6 |
8 | BS1 | Bus selection pin | Note 6-5 |
9 | BUSY | Busy state output pin | Note 6-4 |
10 | RES # | Reset signal input. | Note 6-3 |
11 | D/C # | Data/Command control pin | Note 6-2 |
12 | CS # | The chip select input connecting to the MCU. | Note 6- 1 |
13 | SCL | Serial clock pin for interface. | |
14 | SDA | Serial data pin for interface. | |
15 | VDDIO | Power input pin for the Interface. | |
16 | VCI | Power Supply pin for the chip | |
17 | VSS | Ground (Digital) | |
18 | VDD | Core logic power pin | |
19 | VPP | Power Supply for OTP Programming | |
20 | VSH1 | Positive Source driving voltage | |
21 | VGH | Power Supply pin for Positive Gate driving voltage and VSH | |
22 | VSL | Negative Source driving voltage | |
23 | VGL | Power Supply pin for Negative Gate driving voltage, VCOM and VSL | |
24 | VCOM | VCOM driving voltage |
直流特性
Symbol | Parameter | Test Condition | Applicable pin | Min. | Typ. | Max. | Unit |
VCI | VCI operation voltage | VCI | 2.5 | 3 | 3.7 | V | |
VIH | High level input voltage | SDA, SCL, CS#, D/C#, RES#,BS1 | 0.8VDDIO | V | |||
VIL | Low level input voltage | 0.2VDDIO | V | ||||
VOH | High level output voltage | IOH = – 100uA | BUSY | 0.9VDDIO | V | ||
VOL | Low level output voltage | IOL= 100uA | 0. 1VDDIO | V | |||
Iupdate | Module operating current | – | 3 | – | mA | ||
Isleep | Deep sleep mode | VCI=3.3V | – | – | 3 | uA |
产品图像
在线留言